Costumes Archives • Page 5 of 6 • Jessica Smith Creates

October 31, 2013August 19, 2018

Everything’s shiny, Cap’n!

I love my captain!

And my new Kaylee inspired dress!

Both The Patchwork Pirate and Dianne from Dianne’s Costumes and Research have wonderful recreations of Kaylee’s Prairie Harpy dress.

Dianne had found this fabric from Fabric Tales that matches the original very nearly.

But I don’t have that fabric, or the money to obtain it at the steep price.

I do, however, have this fabric! Not perfect, but I think Kaylee would have definitely worn this fabric if she had the chance. It’s playful and colorful enough. Or maybe that’s just me.

And I have a lot of it. It being the same fabric I used for my culottes. And I have some left over still.

It also wrinkles all over the place. It’ll crease just by lightly folding, even without ironing or pressing it.

I draped the bodice on a borrowed dress form, though it seems I’m a bit chestier than then form is.

At that point I didn’t care much about the direction of the grain of the fabric, since I was using scraps for all of it.

Aren’t scraps lovely?

So then I let it sit around awhile as I was thinking on a skirt plan. Or rather, while I was doing that homework and classes thing…

I lined it in the meantime, which brought about it’s own challenges, but worked out well in the end.

And then I got to work on the skirt. I knew it needed to be at least a little bit full, and I knew that my dress needed to be lined.

In the end I cut out a few rectangles and sewed it all up.

And then it was too tight. Pencil skirt tight.

So I unpicked all of that and added another identically sized rectangle, which brought the fullness I had wanted.

Sewed the waistband to the bodice, and tried it on.

At this point I realized that the bodice was big around my actual waist, in order to get it over my head.

Looking at the inspiration photos of Jewel Staite as Kaylee, I saw that she had an attached belt. So I set about making some belt-like strips. I didn’t want to make one that would actually tie around me, as I often find them uncomfortable, so I had them attach with hooks and eyes.

And finally success!

It matches really well with the jacket I made for my Halloween costume, since the blue is mirrored in the dress fabric.

So all in all, a happy Halloween!

October 25, 2013August 19, 2018

Ever sail in a Firefly

So I’ve been hard at work on my Halloween costume.

I’ve told you that I was planning on making a version of Kaylee’s dress from Out of Gas, one of my favorite episodes in Firefly. It also shows up in the The Message.

And I have! I promise! However, I haven’t exactly taken pictures in it yet. The post is upcoming, I promise!

I had decided while I was working on the dress that I should be Kaylee for Halloween!

Halloween where I live, though, is quite cold, so I always build in temperature ready ideas into my costume.

So I decided that my next project was going to be Kaylee’s blue oriental jacket.

Because I could.

I ordered my brocade from ebay, and it turned out to be exactly what I was hoping for. (I’ve had mixed results with finding fabric on ebay).

I made a muslin, which I had to hack up and maneuver to get it to fit. I had started with my bodice block, since I knew it was rather fitting, but I took out a bunch of the shaping on the bottom. The jacket in the show is oversized and shapeless, so I didn’t feel bad about taking some liberties.

I cut out the fabric, and had just enough to do so. Unfortunately, I couldn’t pattern match as much as I wanted, but I at least had everything set up in the right direction.

Starting out, I wanted to have a double breasted front for warmth. In the end it didn’t work out. The front closes about evenly matched with each other, and I can’t button the top button, because I have a thing about close fitting necks.

Looking back at past projects, I’ve never quite drafted sleeves correctly. One of these days I’ll figure it out, but that day wasn’t my cutting day. I ended up easing the remaining sleeve head fabric into pleats in the back, which gave a very cute tailored look.

The back is a bit tight, which at least keeps me in better posture, having to stand up straight instead of my usual slumping. I don’t have the best movement range because of this and the kinda tight sleeve caps.

But I love my new jacket! And I’m going to wear it forever and ever.

I will leave you with a picture of my subtle cosplay for the day. Kaylee’s hairbuns and jacket!

October 11, 2013August 19, 2018

Spoilers!

I got the River Song journal on the brain.

Altoids have been a favorite for me, even before I had uses for the tins. I think I’ve had this one for years.

And now I have a reason to use it!

Isn’t the swimming pool cute?

I’ve also been working on the leather outer.

Here it is just cut from the hide, before I “squared” it off.

It got less square after tooling.

I skived off some of the back of the leather, and shaved some beveling into the edges.

Then I got to work dyeing it.

I’ll let you know how it went next time!

September 23, 2013August 19, 2018

We are not the B-Team fool, we are the second A-Team.

So. I have finally finished the vest for my Claudia costume. And today I’m subtle cosplaying her.

I know I told you I was done before, but I found that wonderfully neon fabric I told you about, so I did create a lining.

There’s nothing like handsewing a lining into a garment that makes you miss your sewing machine.

After an additional eight or so hours of sewing, my vest is absolutely complete!

And now I’m off to class!

July 24, 2013August 19, 2018

No one decides my fate

But me.

So I had my skirt.

I then thought about a bodice.

First, though, I decided I would make one of those bodice slopers that I’ve heard so much about.

Burdastyle.com has a nice tutorial on how to make one to your measurements here. I used that one successfully, with the results shown above, in my lovely yellow polyester doubleknit. I didn’t add any seam allowance to my pattern pieces, because I forgot, but also so I could see how close fitting the bodice really was. As far as I can tell it fits quite nicely around my chest, which is the major purpose of the current experiment. I didn’t sew up the underarm seam or the corresponding shoulder seam. If I had I never would have gotten the blasted thing on to check out the fit.

The bodice needed to be changed over to a sweetheart neckline anyway, which disregards the need for the shoulder seam, and the underarm seam seems to fit close enough anyway, and I can always take it in later if its too much, or add in something if it doesn’t.

So I made up my new pattern, and cut out the pieces, adding a little length to it, and put it together.

I hand picked a zipper in, which went pretty well, I think, for my second hand picked zipper.

Then the handsewing the skirt into the bodice. Oh how I miss my sewing machine. If only the serger had a larger neck…

And my completed dress!

Because this was meant to be a wearable muslin, I knew it wouldn’t be perfect, but I had fun learning about it.

I’m planning on adding a strip of tan fabric to the bottom of the skirt, to lengthen it, but because its 120 inches around the bottom, I’m going to need to do some planning. Which also means some procrastinating. In my real version of the dress the skirt won’t be a full circle skirt, and will be longer anyway, so there will definitely be changes there.

There is also a big fold in the back of the bodice when I stand up straight, which I’ll be needing to understand and fix for the future. It’s not just because the back isn’t straight in the pictures, I promise. I’m also planning to move the waistband of the skirt up an inch in future versions. It needed to be lower for modesty for this one, but with a longer skirt, I’d like a higher waist point.

link

And I even know how I can wear this dress! From season 2 episode 11 of Once Upon a Time. Technically she’s wearing a long sleeved sheer shirt under the jacket, but I’ve got to have some creative liberties with my subtle cosplaying!

July 20, 2013August 19, 2018

A chipped cup.

There’s no way to have a serger and not test it out with some nice fabric! On a lot of nice fabric!

Since the fabric I happened to have on hand already was woven and not at all stretchy, I wanted to buy some knits, so I could test it on some fabric that needs some of the stretch that a serger gives.

I was going for cheap knits, at first, so I bought remnants of some polyester double knit. The tan, blue, and yellow ones are all pretty scratchy, but I bought them mostly for practice, and to use as muslins for heavier knit projects. The gold dotted one is the one I really wanted. It’s a gorgeous fall gold, and if I wanted to be poetical I would say it reminds me of New England in autumn.

The minute the auction closed on my serger I thought that maybe this machine could give me a chance to try out some ideas for my Belle outfit. I’ve not had much luck with my regular sewing machine with stretchy fabrics, and though I’m working to change that the serger will overall come in handy.

For my real dress, I want a sweetheart necked bodice with a lace overlay, some sleeves, and a skater (circle) skirt.

The lace top to the real bodice is something I am planning to figure out another time, potentially with a coupon and really cheap stretch lace. I’ll be willing to shell out a little more money for better lace once I know how it will fit together.

But for now, I’d like to work on the skirt, see how and where I’d like it to fit, and then the bodice in turn, so that I know how I’d like to make the real dress.

Whenever I actually get around to that.

I started out with this fabric, which I knew I wanted as a skirt anyway, and I definitely wanted to try out a full circle skirt.

So I had folded a piece into a small square, with two folds, and cut out the waist. I then trimmed the hemline, knowing that I probably wouldn’t actually hem it. It is a lovely knit, but I knew that the skirt would already be a bit short on me. When possible, I prefer to give myself a higher waisted skirt. My smallest point around my midsection is pretty high up (as is my natural waist though that’s not quite as high), and I like to emphasize that when I can, which then requires longer skirts.

Then a waistband went on, though I didn’t quite plan it well enough and it came up short in the back. It was really at this point where I decided to think about putting on a bodice. I’m more willing to add extra work to my plate than come up with a simple quick fix for a skirt waistband.

I’ll talk about the bodice in my next post on this project!

July 16, 2013April 11, 2019

More than just an oversized IPhone

This is my final wrap up post for my Altoids tin Farnsworth.

farnsworth - front

I’ve decided that for projects that span more than two posts, I want to give more of a real goodbye.

Both the projects and I deserve it, in my humble opinion.

Here are the links to each post, in order from inception to completion.

Oh Farnsworth, my Farnsworth

farnsworth - dsc09302

Busy Bee

farnsworth - dsc09336

Elbow Grease

farnsworth - finished-squiggle

Loving the Fugue

I’m not laughing at you, I’m laughing with the horse

farnsworth - top

Proceed with the splaining.

The Farnsworth has fascinated me since I started to watch the show. I’m not actually a smartphone user, so at the time, it was really neat to have a communication device that was more face to face.

Yes, I know that there are apps like Facetime and Skype that will let you talk face to face, but I’m not quite up to date with technology.

Some of my thoughts on the construction:

Next time I want to make an altoids sized prop, I should weigh my choices better. If I’m going to cover the lid with something, like felt or paper, then an Altoids tin is fine, as the embossed lid will be covered. But if I’m just going to paint it, then I should find a tin without embossing.

It’s very neat that underneath the covering of the tin is a somewhat glossy coat. It didn’t even feel all that scratchy even with the sandpaper.

Rustoleum smells. But it does cover well, and I really enjoy the shiny coat from the glossy black paint. I do need to buy a few extra paint brushes next time. Or decide to do painting like this when I have a sink that is not white to wash the brush in. White porcelain and black paint don’t exactly work together. In my previous experience, at least. I decided not to wash out my one paintbrush, so each time I did a new coat the brush bristles were less and less bendable.

Wire requires proper tools to bend and work with it. I have bought some since, but I now definitely know that eyeglasses cases and nail clippers are not suitable.

Check the shipping address to make sure you aren’t sending your purchase to one of the other many addresses you may have on file. It happened to me… three times now. In the past month?

Realize in advance that cardboard is a wonderful substance, and though its not underappreciated, it should be acknowledged more often.

Glass can be quite heavy.

But all in all, the Farnsworth looks really good in my hand, and even in its diminutive state compared to show-accurate ones, I think its a pretty good build!

Onwards!

July 12, 2013October 14, 2018

Proceed with the ‘splaining

Did Claudia’s Farnsworth not disintegrate in the penultimate episode of this season? And then reappear in the season finale?

farnsworth - front

Well, whatever happened, I’m finished my version.

farnsworth - lens

I received my lens yesterday, which nearly completed my prep.

I still had not managed to solve the problem of the combination lock, as I needed to see how big the lens would be within the tin before I could move on to cutting up the microphone tip and making a combination lock.

There were a few circles of the microphone mesh, and a few ideas about the lock that circled through my head.

With a little work from my gold paint pen, I ended up using a rubber piece that I had cut off the microphone while I was taking it apart.

farnsworth - notebook cover2

The plan came together quite quickly last night.

farnsworth - notebook cover

First the cutting out of the black plastic piece. I had the cover from an old black Fivestar notebook handy, which I use to keep wall decals safe as I travel to and from dorms and college and such.

fansworth - mic cut

I had some extra space in the bottom of the tin that I could raise the plate structure up, so it looked more 3-d and still manage to close. I did this with a few layers of cardboard. I had to cut out a space for the wire mesh, though, so it would sit flush with the cardboard surface.

Then I cut out the circle to reveal the wire mesh, and glued on the “tuner.”

farnsworth - lens glue

The lens needed to be glued to some paper, to give it that blank screen look.

The assembly continued, and all pieces were glued together with super glue, which currently is my only adhesive option.

farnsworth - top

And I got my finished product! Do you like it?

farnsworthleft1

Edited: As of right now this is the end of this project. Follow it from its inception, to further planning, to sanding and painting, to the wirework, to the gold detailing, to (this) the gluing of all the components together.

July 8, 2013August 25, 2022

Off the wrist of a handsome Time Agent

So… I made a kind of vortex manipulator.

link

At least it feels like I made a vortex manipulator… perhaps a steampunk time manipulator would be a better term.

As in, “you forgot to wear me, so I’m giving you the wrong time” manipulation.

I bought this awesome self winding mechanical watch from Ebay, and had already been considering working with leather, because its just so cool, so I made myself a watch-band/cuff.

That vaguely looks like a vortex manipulator.

**And I would like to say in advance that all the leather I have bought so far have been remnants from companies, so I’m using what would have been thrown in the trash and discarded to source my minor projects, not whole skins. I know about the ethical dilemmas surrounding leather, and I have not yet finalized my opinions.

Many fun attempts with the leather came first, punching and cutting and drawing, and all sorts of amusing and loud means. I needed to get a feel for how the leather would work before starting in on the project.

I found out that the leather I had bought previously was not the right type of leather for tooling – the term for creating designs on leather by cutting and punching.

Then I bought more leather, the right kind of leather.

I cut out my cuff base out of dark brown leather, and roughly cut off my pieces for my designs out of the tooling leather.

I dutifully wet the leather, then I drew out my design. I have been doing pretty well just drawing free hand with a pencil, which won’t transfer the graphite on the wet surface.

Then I used my swivel knife to cut out the design

I used my newly acquired old leather tools to make my pretty patterns on them. One side is inspired by the TARDIS explosion painting, which I adore, and the other has some circular Gallifreyan components, inspired by these fan grammars.

Because my wrist is really tiny, I knew I was going to have a lot of bulk around the top of the wrist, where the watch itself would lay. In order to reduce this, even just slightly, I thinned out the leather on both sides of the tabs at the top of the tooling leather. The tooling leather attaches around the watch with an itsy bitsy rivet. Ain’t it cute?

The hole punch came out and I punched a bunch of carefully placed holes for my rivets and snaps, cut down some of the leather at the end of each strip, and put it all together!

It doesn’t lie flat very well, because the tooling leather takes a little more depth to make it around my wrist, so its a bit more three dimensional.

It looks awesome on my wrist though! I’m very happy with it!

Now I just need to train it to give the correct time…

Linked to Steam Ingenious’s July Link-up

July 2, 2013October 14, 2018

I’m not laughing at you, I’m laughing with the horse.

So I’m continuing work on my Farnsworth as I’m waiting for my new serger to decide it wants to sew.

If I have the option of not handsewing, I’ll avoid it.

With very few exceptions.

So I got the wires all glued in, though I’m not sure how permanent the super glue will end up being.

We’ll see!

farnsworth - left

I received my gold paint pen, and almost immediately got to work on some detail work.

farnsworth - full

The handwriting inside is a little too off center for my liking, but it will do for this project. If I ever redo the Farnsworth, I’ll be a little more exact and a bit more careful.

farnsworth - mic

Feel free to ignore my artsy photography choice above. I’m working on it.

Also I took apart a broken microphone, and will be using the microphone wire mesh for the same basic purpose on my version.

I just need to figure out how to cut it.

Perhaps I need some wire cutters.

Edited: As of right now this project is finished. Follow it from its inception, to further planning, to sanding and painting, to the wirework, to (this) the gold detailing, to the gluing of all the components together.